Confused by the technical jargon or buying refuse sacks, or are you buying a sack which is too strong for your application? This 3 step-guide helps to simplify the jargon to help you chose the right type, size and thickness.
Step 1 - Choose the type required
Where is the waste going to end up?
Step 2 - Calculate the size you need
To calculate which size refuse sack is needed for your bin just use these simple formulas. Round Bin Width of sack= Radius of bin x π (3.14) Length of sack= Length of bin + approx. 15cm for overhang and tying Length Radius Rectangular/Square bin Width of sack= width + depth of bin Length of sack= Height of bin + approx. 15cm for overhang and tying
How does the sizing work on a sack
A lot of bin liners are shown as three sizes i.e. 18x29x39”
This is how it works:
Step 3 - Choose your Thickness
Not necessarily, so this is where testing comes in. CHSA have devised a scheme to make it easier to understand. Previously it was gauge or micron thickness. Another method is to check the weight of your sacks
Consider what kind content will go in the sack. For example if you know you are going to have heavy refuse then you will need a strong, durable sack, so you will need a 20 kg sack. If it will be used just for paper or other light weight items, you only need a 5 kg sack.
Here are some general examples: